Wall Ties and Restraint Fixings: The Detail Is in the Connection
Updated: 1 day ago

A wall tie is a relatively small component in the overall construction of a building. It is also one of the components that you really do not want to get wrong.
While masonry support brackets and windposts are generally prominent features on structural drawings, the restraint fixings connecting masonry to the supporting structure can receive considerably less attention.
At KBS Design Solutions, Stenix brings together masonry restraints, wall ties, channels and associated fixings. The starting principle is simple: a restraint fixing should be selected for the connection it needs to make, not simply because it fits the hole.
Understand the complete load path
The designer needs to understand how load transfers from the masonry into the supporting structure. For a brickwork leaf restrained to light-gauge steel framing, that path includes the masonry, tie, tie-to-frame connection, steel framing and ultimately the primary structure.
Not all substrates are created equal
Concrete, structural steel, light-gauge steel framing and masonry all present different fixing requirements. Concrete strength, cracked conditions, edge distances, anchor spacing and embedment may govern one connection, while steel thickness, grade and screw resistance may govern another.
The substrate is not simply where the fixing goes. It is part of the engineered connection.
Movement must be considered
Masonry and structural frames do not necessarily move in the same way. A restraint system should provide the required resistance without unintentionally preventing movement that the overall design is intended to accommodate.
Cavity width is only part of tie selection
Greater insulation thicknesses and more complex facade build-ups mean that tie selection cannot be based on nominal cavity width alone. The actual distance between connection points, effective embedment, offsets and installation geometry must be considered.
Durability is an engineering consideration
Restraint components are frequently concealed within construction and may be extremely difficult to inspect or replace later. Material selection and corrosion resistance therefore need to reflect the design life, exposure and compatibility of the complete assembly.
Coordinated technical information matters
A good restraint detail should answer practical installation questions: what is the fixing, what substrate is it intended for, where should it be positioned, what engagement is required and what movement must be accommodated?
Stenix: engineering the connection
Stenix is the KBS Design Solutions family covering masonry restraints, wall ties, channels and associated fixing solutions. Its purpose is to integrate the technical requirements of the complete connection rather than treat individual components independently.
Working alongside Kernix masonry support and Braxis windposts, Stenix helps coordinate restraint requirements across the wider facade design. Sometimes the smallest component on a drawing is carrying a great deal of responsibility.
Related KBS systems and guidance
Explore related KBS technical pages: Stenix masonry restraints and fixings · construction fixings and anchors.



Comments